note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: ra0102b doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / sdad10 1 _ _ _ _ _ _ _ _ screening 2 / __ = not screened tx = tx level txv = txv level s = s level reverse recovery time uf = ultra fast recovery time voltage 2.5 = 2.5kv, 5 = 5kv, 7.5 = 7.5kv, 10 = 10kv, and 13 = 13kv current rating = m (see below) package size = 1 inch diameter sdad101m2.5hf thru sdad101m13hf 30 nsec 2,500 to 13,000 volts hyper fast recovery stackable high voltage rectifier features: ? stackable to 600 kv+ ? piv: 2.5 kv to 13 kv ? hyper fast reverse recovery time: 30 nsec ? hermetically sealed internal discretes ? controlled avalanche rated ? modular design for easy stacking ? storage and operating temps -65c to +150c ? available in standard, fast and ultra fast versions ? tx, txv, and s-level screening available 2 / electrical characteristics 3 / part number peak inverse voltage reverse recovery time 5 / average dc output current tc = case temperature 4 / surge non- repetitive maximum forward voltage drop maximum leakage current @piv piv (kv) max (ns) if(avg) ifsm vf (v) if (a) ir (ua) 25oc 25oc 75oc 50oc 100oc 25oc 25oc 100oc sdad101m2.5hf 2.5 30 0.80 1.00 25 8.0 1.00 20 250 sdad101m5.0hf 5.0 30 0.80 1.00 25 14.0 1.00 20 250 sdad101m7.5hf 7.5 30 0.80 1.00 25 20.0 1.00 20 250 sdad101m10hf 10 30 0.72 0.90 25 26.0 0.90 20 250 sdad101m13hf 13 30 0.56 0.70 25 34.0 0.70 20 250 sdad101 package: notes: 1 / for ordering information, pric e, curves, and availability- contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / unless otherwise specified, all electrical characteristics @25oc. 4 / tc = 50 oc typical operation in oil. tc = 75 oc is typical ambient ta = 25 oc. 5 / recovery conditions: i f = 0.5 amp, i r = 1.0 amp rec. to .25 amp.
|
